Guide Hub
Open the guide that matches the job in front of you. The hub now combines model-specific assembly pages with a dedicated programming workflow for the Solterra DownloadTool, all arranged into clear, service-friendly steps.
Digital Charger Programming Guide
CAN first, then UART / TTL fallback
This is a guide for programming A, B, C Series Solterra Chargers using CANbus or UART.
Includes CANALYST / PEAK CAN setup visuals, UART header guidance, CAN timing notes, and direct download actions at the end of the page.
LBS23 RCD Cable Assembly Guide
LBS23 RCD केबल असेंबली गाइड
This guide covers the full LBS23 inline RCD cable assembly workflow: prepare both cable ends, open the housing, terminate the conductors on the RCD, secure the clamping hardware, close the enclosure, and retest the charger electrically.
Includes a step navigator, bilingual instructions, image-based guidance, torque values, and connection labels for the full workflow.
P151630-F Cable Assembly Guide
P151630-F केबल असेंबली गाइड
This guide covers the P151630-F cable assembly flow: prepare both cable ends, open the housing, remove and reuse the nut / pressing sleeve / rubber seal set, terminate both cable sets on the RCD, close the housing, and retest the charger electrically.
Includes a step navigator, bilingual instructions, image-based guidance, torque values, and connection labels for the full workflow.
Related Support References
Keep moving between the support guides below to narrow the issue faster.
Step-by-Step Troubleshooting
Pick a symptom and follow the correct field checks before escalating to service.
LED Fault Codes
Review Solterra LED fault codes, match blink patterns, and use the interactive simulator and reference table.
Solterra Charger FAQ
Read common answers on battery support, CAN customisation, warranty, standards, and OEM work.